view cart menu separator categories menu separator faq
advanced search
categories  > Pit Bikes (5)
pitstar 125 pro HR

pitstar 125 pro HR

Price: $2,650.00 add to cart     
Feedback: n/a Ask seller a question
Shipping: US-Mainland: free (more destinations)
Seller's Country: Australia
Condition: Brand new
Payment with: Money Order, Cashier's Check, Personal Check,
*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Engine Model: Pitstar 125cc start any gear
Egine Type: Single cylinder, 4 Stroke, Air Cooled Horizontal Cylinder
Bore mm: 52.4
Stroke mm: 57
Displacement ml: 124
Compression Ratio: 9.0:1
Maximum Output kw/hp: 7.0kw, 9.45hp (7500+/- 500 r/min)
Maximium Torque Nm: 8.6 (5500 +/- 500 r/min)
Starting System: Kick only
Idle Speed: 1500 +/- 500r/min
Clutch Type: Wet Multi Plate
Transmission Gear Type: 4-speed Manual- Clutch on main shaft ( Start in any gear)
Carburettor : Japan Mikuni 25mm
Ignition: CDI
Fuel Type: High Grade Unleaded (95 or Higher)
Spark Plug: NGK CR7HSA
Engine Oil Grade: 10W/40SF
Frame: box section 6061 T6 Heat Treated Alloy Frame
Swing Arm: Mono link style 6061 T6 heat treated alloy, alloy chain guide, nylon slider and roller
Front Suspension: USD 6061 T6 forged alloy body, compression and rebound adjustment
Rear Suspension: Fully adjustable rebound and compression
Front Wheel: Heavy duty 14 inch Aluminium rim, heavy duty cnc machined hub assembly, heavy duty spokes, high tensile 15mm axle and Kenda tyres.
Rear Wheel: Heavy duty 12 inch Aluminium rim, heavy duty cnc machined hub assembly, heavy duty spokes, high tensile 15mm axle and Kenda tyres.
Handle Bar: Alloy bars Pro taper style
Bar Grips; soft rubber grips :
Tripple Clamps: Alloy cnc machined 6061 T6 heat treated
Bar Mounts: Alloy cnc machined anodised with adjustable bar mounting
Controls (Levers): Alloy foldable clutch and front brake lever
Throttle: Alloy cnc machined quarter turn quick release joker style
Front Brake: Hydraulic disk brake, alloy foldable lever and wave rotor
Rear Brake: Hydraulic disk brake with wave rotor
Foot Pegs: Alloy cnc machined
Exhaust: Performance exhaust with cnc machined billet cap
Gear Lever: Foldable lever
Seat: Tall foam
Plastics: CRF style with Pitstar sticker kit.
Seat Height: 760mm
Max Weight: 100kg
Dimensions: 1530 x 760 x 1010 mm
Net Weight: 57Kg
Other Products from factorythumpstar:View all products
helmet (m)blue
Boxed & Stamped Chromo frame with cradle RED
Genuine Lifan Big Bore 140cc Engine
pitpro 140 with race motor
125 bse rs pitbike
Last Updated: 30 Jan 2008 08:28:56 PST home  |  about  |  terms  |  contact
Powered by eCRATER - a free online store builder